Cologne: 26.–29.10.2021 #aquanale

EN Icon Pfeil Icon Pfeil
EN Element 13300 Element 12300 DE

Contact Person

Contact person for traffic and logistic
Roman Gersch

Roman Gersch
Consultant for site security/logistics
Tel. +49 221 821-2670
Fax +49 221 821-3429
Write an e-mail

Contact person for stand engineering, stand fittings and stand services

If you have any question regarding our technical stand engineering (suspended installations, electrical and water connections), stand fittings or stand services please contact:

Tel. +49 221 821-3998

For further information please have a look at "Stand services" .

Contact person for stand construction permit

If you have any questions regarding event technology and approval please contact:

Write an e-mail

Tel. +49 221 821-3666

For questions regarding our technical stand engineering (suspended instgallations, electrical and water connections) pleae have a look at "Stand services"

Maximum stand height/special constructions

The maximum height for structures or advertising material of all stand constructions (incl. signs, banners and other advertising and construction elements) is determined seperately for each hall, to the extent that existing structures within the hall can individually accommodate any. Exceeding the limits of the maximum structure and advertising heights of any kind (lighting, screens and any stand construction) must be applied for and approved by Koelnmesse GmbH at the latest 6 weeks before build up starts. The rear walls of stands should be decorated in a neutral manner.

Maximum heights:
Hall 6: 8.00 m
Hall 7: 8.00 m
Hall 9: 8.00 m
Hall 10.1: 5.00 m
Hall 10.2: 5.00 m

The maximum height for structures or advertising material of all stand constructions in passages and boulevards is 3.00 m.

As long as the technical guidelines are observed when designing and erecting stands, there is no need to submit for approval drawings for onestorey stands that do not exceed the permitted height. All other stands and designs must be approved, particularly if the stand features special structures or meeting areas, or static calculations are required. Plans must be submitted in duplicate for approval by Koelnmesse in good time before the work is carried out, and at least 6 weeks before the event commences. These documents, which can be scrutinized, consist of ground plans, views and design cross sections with all measurements.

Technical guidelines (pdf)

Please observe the technical guidelines for trade fairs and other events; the guidelines are binding on all exhibitors and organizers.
Technical guidelines (.pdf)